Rebuild transmission

Welcome to! Think you've got a faulty transmission? Replacing transmission is a quite expensive project, but there is another way – rebuilding your transmission. Check out our site to learn how to rebuild it, browse through rebuilt transmission prices, read expert advice and more information.

How to rebuild a transmission

Building a strong transmission usually starts with an internal gear train. The weakest link in the transmission gear train is the sun gear shell.  Upgrading this shell is highly advisable especially when it comes to changing gears for transmission.  Building a transmission is not an easy task; you need to have skill and should have the right gears for building a good transmission.  Early transmissions include the right angle drives.  Most modern gearboxes are used to increase torque while reducing the speed of a prime output shaft.  The output shaft rotates smaller than the input shaft.  This reduction in speed will produce a mechanical advantage, causing an increase in torque. 

A gearbox can be set up to do the opposite and provide an increase in shaft speed with a reduction of torque.  Knowing how to build a transmission is important, especially if you want your vehicle to function properly.  Many typical automobile transmissions include the ability to select one of several gear ratios.  A transmission will have multiple gear ratios, with the ability to switch them as speed varies.  This switching could be done manually or automatically.  That’s why you see cars today having manual gears and automatic gears.  Building a transmission, you need to have the right set of gears.  Installing them would take some time but there should be consistency in dealing with the gear functions and parts. Alternative mechanisms include torque converters and power transformation.  The need for a transmission in an automobile is a consequence of the characteristics of the internal combustion engine. 

Most engines range from six hundred up to about seven hundred revolutions per minute.  The dynamics of a car vary with speed, and at low speed acceleration is limited by the inertia of vehicular gross mass.  Building a transmission you need to understand the basics and let an expert show you the different kinds of gear on a vehicle.  It wouldn’t be that difficult if you know someone who’s patient enough to teach you the basics of transmission.  Having the proper gears are important in transmission.  You should know whether you’ll use the right gear for manual or automatic.  Knowing how to install gears would prove helpful.  It doesn’t need any technicalities or whatnot, the important thing is that you know the things that you have to do when installing gears and having the right kind of transmission in your vehicle.  It is highly important for us to understand the basics about doing these transmissions.  But just to show you how complicated this process can be, here’s a video of Honda Odyssey automatic transmission rebuild (as shown on

The gears that are needed should be compatible with the vehicle.  This is an advantage because knowing how to build up transmissions will certainly help us deal with our vehicles in the future.  Manuals and Automatics are essential to the user.  It’s important to choose whether we’ll buy an automatic or manual car.  Each person has a personal preference.  Having an automatic car is good for city driving.  The manual has its own advantages as well.  The risk of sleeping while driving would lessen if you drive a manual car.

Transmission Rebuild 101

Many people want to save money. Thus, instead of replacing the worn out car transmission with new one, many car owners opt to have a transmission rebuild. It is true that brand new transmissions are more expensive compared to brand new engines. In the process of transmission rebuild, there is major overhaul on the vehicle’s transmission. In this scenario, you are only replacing the worn out mechanical parts and not the entire transmission, allowing you to spend less.

Transmission rebuild is not an easy maintenance to do to make your car perform better. The transmission needs to be properly inspected. Each mechanical part should be examined. Those that can be repaired should be repaired and those that are completely damaged should be replaced with new one. After you have replaced some of its parts, you will surely enjoy again the efficiency of your car without spending too much.

Rebuilding the transmission of a vehicle is considered very effective. But aside from saving a lot of money, you can also save time. Transmission rebuild will be done for less than a week since there is no need to reinstall all the parts. Sometimes, brand new transmission will take more than a week because you still have to removed and reinstall the entire transmission.

However, there are cases when the vehicle will not be restored to its peak efficiency. The lasting effect of the rebuild transmission relies also on the quality of the new parts used to replace the old parts, the skill of the mechanic and the carefulness of the rebuild transmission process.

Indeed, there are many things and factors you need to consider extending the life of the transmission. You need to buy the high quality mechanical parts and you have to hire the best transmission mechanic that has the ability to notice and conduct a very detailed and careful transmission rebuild.

Should the Transmission Be Replaced or Rebuild?

It is important for a car owner to know to replace the transmissions of his vehicle. Transmission motors in the vehicle are responsible for the power distribution on the car. There are two kinds of transmission, the automatic transmission and the manual transmission. Automatic transmission allows the car to shift gears with a less supervision for the driver. Manual transmission however, needs the driver’s full action when changing the gears when slowing, turning and speeding. Transmission motors are also responsible for the power that you will receive when you turn on the switch of your car. With the right amount of torque and transferred energy or force by the driver, transmission motors automatically distributes the needed amount of energy to make the car move. However, with continuous use of the car, transmission motors or engine is prone to wear or break thus needed to be replaced immediately.

To know if your car’s transmission needs replacement or rebuilding, you should contact a professional auto mechanic to deal with the job. To know if the transmission needs replacement, you can check the gears if it is torn or has reached its limit based on the thickness or size. Rebuilding transmission is also needed if the motor is not functioning properly. This may be a cause of some gears or parts that are already torn thus damaging or affecting the other parts of the transmission motors. The process of rebuilding transmission motors is tricky and needs careful work and preparation. You should note that before you begin the process of fixing your transmission you should check your things including safety its and the needed tools for the job. You should also familiarize yourself with the different parts and types of gears used. In some cases where you might find fixing the transmission motors hard, you may always contact your local auto repair shop thus expenses are expected to increase than doing the repair yourself.

What is involved in automatic transmission service

Transmission gears deliver power from the engine to the drive wheels, shifting automatically to provide the best power and efficiency of your driving speed.  If you have problems with your transmissions, it is imperative for you to visit a shop that fixes transmissions.  An automatic transmission is different from a manual one.  Automatic transmission lubricates, cools, and cleans internal components of the transmission. It helps maintain the hydraulic pressure necessary for the transmission to function.

Automatics are different than the manual transmission.  Their functions and parts are different than those of a manual transmission.  Technically, it’s much easier to drive an automatic car than a manual one, simply because you don’t need to change the gears of your car when driving.  The only drawback to this is if you wouldn’t maintain or take care of your automatic transmissions, then you’re going to have a hard time if the transmissions break.  If it breaks you need to have an automatic transmission service.  Usually you can hire someone or bring your vehicle in the shop.  Changing the fluid in the transmission system, including the torque converter and transmission cooler is the first step.

Then they will remove the transmission pan and they would also remove the old transmission filter and replacing it with a new one.  After which they would remove the old gasket replacing it with a new gasket, reinstalling the pan as well.  Then they would refill the transmission with new automatic transmission fluid to its proper level.  This is how an automatic transmission service is, and most customers who have problems with their automatic cars visit a shop that could do all of these important procedures.

That’s why that we should take care of our vehicles, especially those that have automatic transmissions.  Usually, automatic transmission cars are more expensive than manual ones.

Where to find cheap transmission repair

If you’re looking for a cheap transmission repair, then it helps to know where to look at.  While in some cases, it may not be possible to find cheaper transmission repairs when your car breaks down in an area that you aren’t familiar with.  Cheap transmission repair is an option to those who take time to find it.  If you’re getting your brakes worked on, ask the mechanics if they know somebody who could repair broken transmissions.  Not all shops are expensive.

You could search for a transmission repair shop that offers a special discount or special discounts or special pricing to certain customers.  Searching for transmission repairs is very important because you’ll save a lot of time and money.  Some schools perform cheap transmission repair work.  There are a lot of people who are interested to have their transmissions repaired at vocational schools.  There are also a lot of websites that have cheap transmission repairs.

You just need to make sure that the website that you’re visiting could be trusted.  You could save more money online as well.   Repairing transmissions are important because you won’t risk driving your car that doesn’t have a brake fluid.  It’s highly important for us to maintain our vehicles.  Having faulty transmissions is not acceptable and it would endanger the owner of the vehicle.  The risk of having an accident when you have faulty parts in your vehicle would increase.  The danger is inevitable but it could be prevented.  If we maintain our cars then we wouldn’t have any problems with faulty transmissions in the future.

Looking for a cheap transmission repair shop is also a way saving money.  Most of the time you could find a shop near downtown that offers cheaper transmissions.  It will be advantageous for everybody to have a car that doesn’t have broken transmissions.

Rebuilt transmission prices

Rebuilding transmissions would seem costly but to some it’s a way of saving money.  It’s costly in a way because you are replacing some or all of the parts and engine of your car.  You replace old parts to new ones, but the external case of the car remains unchanged.

It’s in a way expensive because the cost of parts and gears of the cars is high end thus more expensive than buying an ordinary car.  Let’s look at the other side of the coin; if the owner of the car chooses to replace the parts that are not that expensive, he then saves money because if he buys a brand new car it would cost him more.  However, most of the times customers who choose t rebuild their transmission would cost them higher than usual.

Repaired transmission is normally is the cheapest process, as it does not require removing and disassembling the whole transmission like standard leaks, fluids, routine care and maintenance, etc. An overhauled transmission requires transmission to be removed and disassembled.  Prices range on the service or process that the transmission is built or removed.  Mostly taken parts have process and all internal and external parts including case and housing have been thoroughly cleaned and inspected.  There are soft parts and hard parts in transmission.  The soft part transmission consists of clutches, bands, internal and external seals, sealed rings, lip seals o’ rings, gaskets.  Generally the hard parts of transmissions are planet gears, drums, shafts, converter, and pumps.  In rebuilt transmissions the unit is not necessarily “overhauled”.

In troubleshooting some parts might be replaced but not all.  Some are just cleaned, swapped from other old transmissions.  Upgrading power and transmissions are usually for racing, sports, specialty requirements and configurations.  Overdrive transmissions are for drag racing and these kits for enhanced performance and acceleration.